Green Value Stream Mapping: A Tool For Increasing Green Productivity (The Case of PT. NIC)

Raymond Budihardjo, Wijanto Hadipuro

Abstract


The role of the environment in business success is increasing from day to day. One of the ways to harmonize the goals of making a profit with the environment is by achieving green productivity. Green productivity means that companies can increase their productivity and at the same time improve their environmental performance. To reach that goal one of the ways is that businesses apply value stream mapping and make all the activities to be green which is known as a Green Value Stream Mapping. A combination of secondary data collection and Focus Group Discussions involving all relevant production staffs was conducted to get the initial data and the ideas to improve the performance of electricity, LPG, and water consumption at PT NIC Semarang. Compared to the initial data of the Current State Green Value Stream Mapping, the improvements resulted from the Future State Green Value Stream Mapping were a 51.4% decrease in electricity consumption, a 24.42% decrease in LPG consumption, and a 60% decrease in water consumption. From this empirical study, two important outcomes of future implications were found. For the food industry, implementing GVSM should be adjusted in such a way that the experiments to reach the Future State Green Value Stream Mapping will not affect the quality of the final products and that FGDs are very effective to generate ideas of improvements and getting commitments from production staffs to implement the improvements

Keywords


green value stream mapping; green productivity; Semarang

Full Text:

PDF

References


Alabay, E. (2008). Analysis of a Production System: Investigation of Improvement Areas in the Assembly Line within WesternGeco. Master’s Thesis in Production Engineering and Management. The School of Industrial Engineering and Management. Royal Institute of Technology, Stockholm.

Asian Productivity Organization (2006). Handbook of Green Productivity. Tokyo: Asian Productivity Organization.

Chugani, N., Kumar, V., Garza-Reyes, J.A., Rocha-Lona, L., and Upadhyay, A. (2017). Investigating the Green Impact of Lean, Six Sigma and Lean Six Sigma: A Systematic Literature Review. International Journal of Lean Six Sigma, 8(1), 7-32.

Corbett, C.J., and Klassen, R.D. (2006). Extending the Horizons: Environmental Excellence as Key to Improving Operations. Manufacturing & Service Operations Management, 8(1), 5-22.

Dadashzadeh, M., and Wharton, T.J. (2012). A Value Stream Approach for Greening the IT Department. International Journal of Management and Information Systems, 16(2), 125-136.

Dimyati, A.F., and Singgih, M.L. (2019). Environmental Impact Evaluation Using Green Value Stream Mapping (Green-VSM) and Life Cycle Assessment. Jurnal Teknik ITS, 8(2), 157-163.

Faulkner, W., Templeton, W., Gullet, D., and Badurdeen, F. (2012). Visualizing Sustainability Performance of Manufacturing System Using Sustainable Value Stream Mapping (Sus-VSM). Proceeding of the 2012 International Conference on Industrial Engineering and Operation s Management. Istanbul, Turkey, July 3-6, 2012, 815-824.

Faulkner, W., and Badurdeen, F. (2014). Sustainable Value Stream Mapping (Sus-VSM): Methodology to Visualize and Assess Manufacturing Sustainability Performance. Journal of Cleaner Production, 85, 8-18.

Fearne, A., and Norton, A. (2009). Sustainable Value Stream Mapping in Food Industry. In Waldron, K. (Ed), Handbook of Waste Management and Co-product Recovery in Food Processing. Cambridge: Woodhead Publishing.

Garza-Reyes, J.A., Romero, J.T., Govindan, K., Cherrafi, A., and Ramanathan, U. (2018). A PDCA-based Approach to Environmental Value Stream Mapping (E-VSM). Journal of Cleaner Production, 180, 335-348.

Hadipuro, W. (2020). Manajemen Lingkungan Hidup untuk Bisnis. Yogyakarta: Penerbit Andi.

Hawkens, P., Lovins, A.B., and Lovins, L.H. (2010). Natural Capitalism. London: Earthscan.

Henrique, D.B., Rentes, A.F., Filho, M.G., and Esposto, K.F. (2016). A New Value Stream Mapping Approach for Healthcare Environments. Production Planning & Control: The Management of Operations, 27(1), 24-48.

Kurdve, M., Hanarp, P., Chen, X., Qiu, X., Yan, Z., John, S., and Jonas, L. (2011). Use of Environmental Value Stream Mapping and Environmental Loss Analysis in Lean Manufacturing Work at Volvo. Proceeding of the 4th Swedish Production Symposium (SPS11), Lund, Sweden, May 3-5th.

Lee, J.K.Y., Gholami, H., Saman, M.Z.M., Ngadiman, N.H.A.B., Zakuan, N., Mahmood, S., and Omain, S.Z. (2021). Sustainability-Oriented Application of Value Stream Mapping: A Review and Classification. IEEE Access, 9, 68414-68434.

Liker, J.K. (2021). The Toyota Way 2nd Edition. New York: McGraw Hill.

Magnier, P. (2009). The Lean Enterprise – Value Stream Mapping. Release.org. Available at https://www.academia.edu/6341518/The_Lean_Enterprise_Value_Stream_Mapping.

Marizkaa, D.A., Djatna, T., and Arkeman, Y. (2015). A Model of Green Value Stream Mapping for Rubber Based Automotive Products. Scientific Journal of PPI-UKM, 17-23.

Monden, Y. (2012). Toyota Production System: An Integrated Approach to Just-in-Time Fourth Edition. Boca Raton: CRC Press.

Muñoz-Villamizar, A., Santos, J., Garcia-Sabater, J.J., Lleo, A., and Grau, P. (2019). Green Value Stream Mapping Approach to Improving Productivity and Environmental Performance. Int. J. Productiv. Perform. Manage, 68(3), 608-625.

Nallusamy, S. (2016). Lean Manufacturing Implementation in a Gear Shaft Manufacturing Company Using Value Stream Mapping. International Journal of Engineering Research in Africa, 21, 231-237.

Pampanelli, A., Found, P, and Bernardes, A. (2014). A Lean and Green Model for a Production Cell. Journal of Cleaner Production, 85, 19-30.

Paryugo, J., and Zhong, L.X. (2021). Green Productivity: Waste Reduction with Green Value Stream Mapping. A Case Study of Leather Production. International Journal of Production management and Engineering, 9(1), 47-55.

Rosenbaum, S., Toledo, M., and González, V. (2014). Improving Environmental and Production Performance in Construction Projects Using Value-Stream Mapping: Case Study. J. Constr. Eng. Manag, 140, 1-11.

Seth, D., and Gupta, V. (2005). Application of Value Stream Mapping for Lean Operations and Cycle Time Reduction: An Indian Case Study. Production Planning and Control 16, 44-59.

De Steur, H., Wesana, J., Dora, M.K., Pearce, D., and Gellyneck, X. (2016). Applying Value Stream Mapping to Reduce Food Losses and Wastes in Supply Chains: A Systematic Review. Waste Management, 58, 359-368.

Verma, N., and Sharma, V. (2016). Energy Value Stream Mapping a Tool to Develop Green Manufacturing. Procedia Engineering, 149, 526-534.

Wills, B. (2009). Green Intentions: Creating a Green Value Stream to Compete and Win. Boca Raton: CRC Press.

Zhu, X-Y., Zhang, H., and Jiang, Z-G. (2019). Application of Green-modified Value Stream Mapping to Integrate and Implement Lean and Green Practices: A Case Study. International Journal of Computer Integrated Manufacturing, 33(7), 1-16.




DOI: https://doi.org/10.24167/jmbe.v4i1.4620

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2022 Journal of Management and Business Environment (JMBE)



View My Stats | Journal of Management and Business Environment (JMBE) | e-ISSN: 2685-5992